window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-32196581-2', 'auto'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Newsletter | Reichelt Chemietechnik
+49 (0) 6221-3125-0 (Mon-Wed 8 am - 17 pm, Thu-Fri 8 am - 16 pm)
Close filters
Filter by:

THOMAPLAST V | Seals | Newsletter 2016 Nr. 11

THOMAPLAST V: Seals

RCT Reichelt Chemietechnik presents its new handbook THOMAPLAST ® Sealings. The handbook provides a user-friendly overview of the seal assortment of Reichelt Chemietechnik, which allows to find a fast and reliable solution to any seal-specific problems. The handbook is divided into the main...
THOMAFLUID III: Connectors made of plastics

RCT Reichelt Chemietechnik presents a new handbook THOMAFLUID® III Connectors made of plastics . The handbook provides a user-friendly overview of the one-piece tubing connectors made of plastics available in the assortment of Reichelt Chemietechnik, which allows the prospect a quick...
THOMAFLUID I: Tubings made of elastomers

RCT Reichelt Chemietechnik presents a new handbook THOMAFLUID ® Tubings made of elastomers . In addition to the basic classification according to materials (CR, EPDM, EPDM/PP, EVA, FPM, glass fabrics, butyl (IIR), NBR, NR, polyolefin, PUR, PVC, SBR and silicone), the register offers a...
Round rods made of virgin PTFE – the semi-finished products for particularly demanding, technical construction purposes

Polytetrafluoroethylene ( PTFE ) is an almost universally applicable construction material due to its extraordinary product characteristics including highest resistance to chemicals and other substances such as acids, bases, solvents, also halogenated, as well as oils and gasoline. PTFE has...
Innovation!

RCT Reichelt Chemietechnik presents a new series of connectors in the product range THOMAFLUID®. Up to now, the effort required to connect corrugated tubing to existing facilities was always somewhat greater without first carrying out a thermal smoothing or expansion. Due to the special...
Foils and Plates made of POM – the allround plastic that can replace metals

The thermoplastic polyoxymethylene with the technical abbreviation POM is also known as acetal resin or polyacetal. In chemical terms, the plastic derives from formaldehyde. According to its polymeric structure, which depends on the synthesis process, a distinction is made between homopolymeric...

Quality Makes Brands

Reichelt Chemietechnik supplies products which are subject to strict quality standards.

RCT strictly keeps all promises made in the handbooks of the company as well as in the technical data sheets. The quality assurance is solidified through constant controls. Quality is substantiated by product brands. This indicates the new product qualification in the product range of Reichelt...
NR/SBR Plates – elastic, tearproof and resistant to aging

Mixtures of elastomers, so-called blends, combine the properties of their respective basic components. By optimizing the mixing ratios, new technically relevant quality characteristics are generated and further application areas are developed. This necessarily applies also to blends made of...
PP Quick-Disconnect Couplings - now also metal-free

RCT Reichelt Chemietechnik offers quick-disconnect couplings made of PP now also in a metal-free version. The leak-proof design provides an ultimate protection against chemicals and vapours. The couplings are disconnected by using the thumb latch which allows a non-spill release and an easy...
Unbreakable PCTFE plates for use in environment, laboratories and pilot plants

PCTFE , the technical abbreviation for polychlorotrifluoroethylene, is a hard, in a wide range exceptionally temperature-resistant plastic. It belongs to the thermoplastics. PCTFE can be permanently used between -255  C (temperature of liquefied hydrogen) and +150  C, for...
Sintered plates made of chromium-nickel steel – highly porous, stable and corrosion-proof

Powdered metals can solidify into fine particles by sintering at temperatures below their melting point. The powder metallurgy makes extensive use thereof particularly for mass production of mechanical components for the mechanical and automotive engineering. Whereas in the case of such...
Yarn Wound Filters – the highly efficient depth filters for the continuous particle filtration

Filtrations are basic operations for the separation of solids from liquids or gases by deposition at surfaces of filter materials in the laboratory as well as in many industrial sectors. The materials serve either the extraction of solids from the liquids or gases carrying them or they are used...
FPM foils and plates for the chemical-technical pilot plant construction and plant engineering

FPM is a highly fluorinated synthetic rubber, also known by its recent abbreviation FKM according to DIN / ISO and ASTM standards. It is cross-linked with bisphenol and therefore absolutely sulfur-free. The specific features of this high-performance copolymer of vinylidene difluoride (VDF) and...
Plug-In Connectors for Pipes – Fast Mountings without Tools

Test facilities, experimental areas and equipment systems in laboratories and pilot plants require for their operation, beside the current supply, in most cases also the supply and removal of liquid or gaseous media such as coolants, brine solutions or inert gases. Once these media are...
Foils and Plates made of plasticized PVC – proven and versatile in use

Polyvinyl chloride with the technical abbreviation PVC belongs to the most important plastics commercially produced worldwide. Virgin polyvinyl chloride, so-called rigid PVC, is a traditional, stiff thermoplastic material for the manufacturing of moulded components. Due to integrated...
Adhesive tapes for construction and repair purposes

Adhesive tapes  are modern tools for the manufacturing of composite materials. The ribbon-like carrier materials, one- or double-sided coated with pressure-sensitive adhesives, can in many cases fully replace screw, rivet, soldered or welded connections. The carrier materials include not...
Laboratory articles made of PFA (perfluoroalkoxy alkane).

PFA is a perfluorinated, semicrystalline, thermoplastic polymer. It combines the outstanding chemical properties of polytetrafluoroethylene ( PTFE ) with the mechanical and technical properties of polyfluoroethylenepropylene ( FEP ). PFA is resistant to nearly all chemicals. Furthermore, the...
EPDM plates for use in laboratories and industrial plants

Ethylene propylene diene rubber, known by its abbreviation EPDM, is a sulfur-vulcanized, permanently elastic synthetic rubber. The elastomer features resistance to weather and ozone, as well as high resistance to water and steam, acids, alkaline solutions, glycols and brake fluids. Notable is...
Tubes made of Thermoplastic Elastomers

Reichelt Chemietechnik offers you tubes made of thermoplastic elastomers in addition to tubes made of elastomers and duroplasts.   Duroplasts, also referred to as duromers, are plastics, which can no longer be deformed after curing. Duroplasts are hard, mostly glass-like,...
Moulded components made of glass-fiber reinforced plastics

Reichelt Chemietechnik now offers moulded components made of glass-fiber reinforced plastics.  Glass-fiber reinforced plastics (GRP) are based on polyester resins or epoxy resins. Glass fibers are added to the original materials. Due to this admixture, the service temperature, the...
Tubing made of HDPE in new dimensions

Reichelt Chemietechnik now offers the universally usable tubing made of high density polyethylene (HDPE) and available in many colours also with inside diameters of 8 and 10 mm or outside diameters of 10 and 12 mm. The tubings in the new dimensions are available in a large variety of colours as...
Tubes and connectors – also inch-dimensioned

Reichelt Chemietechnik presents a great number of tubes and connectors made of standard plastics in either metric or imperial dimensions as a special feature. Often it is impossible to combine imperial dimensions with metric sizes. The following tubes, among others, are available in imperial...
Puri-Flex® Pump Tubing – free of DEHP phthalates and halogen plasticizers

The new Puri-Flex ®  Pump Tubing (silicone-based) presented by Reichelt Chemietechnik   is free of DEHP phthalates and halogen plasticizers and used in the areas of biotechnology, pharmacy, food technology, as well as laboratory technology. The tubing is distinguished by its...
TPE Microcellular Rubber Round Cord − FDA-compliant

The new FDA-compliant TPE microcellular rubber round cord can also be used as a seal in areas coming into contact with food or pharmaceutical products. Therefore it is often used as sealant for containers. It has all the advantages of thermoplastic elastomers, i.e. it has very good elastic...
Magnet-driven gear pump - microprocessor-controlled

With its new magnet-driven gear pump THOMAFLUID ® -E-2000 MP, Reichelt Chemietechnik presents a new pump system meeting highest requirements. The high-tech magnet-driven gear pump is used for delivery of inorganic and organic media in laboratory, chemical and process engineering, and in...
PTFE Adhesive with uncomplicated handling

THOMASANN ®   PTFE Adhesive is a two-component adhesive based on synthetic rubber (contact adhesive). It is suitable for quick, uncomplicated and reliable bonding of parts made of PTFE to other materials. The adhesive provides immediate bonding and thus enables application even on...
Micro Metering Pump of the new generation

The pump is designed for delivery and metering of all kinds of inorganic and organic media. Its application areas are chemical laboratory and analytical technology, especially low-pressure chromatography, biotechnology, pharma development and pharma production, medical engineering and...
Drain Cock made of electrically conductive PA

Reichelt Chemietechnik presents its new drain cock made of electrically conductive polyamide. The drain cock is absolutely tight-closing and especially effortless. A connecting cap nut guarantees the mounting of the cock in a vertical position. The product is fitted with tapered spout for...
Food Tubing made of PVC (TYGON®), phthalate-free

The new food tubing made of PVC is suitable for food, milk and dairy products, and does not contain phthalates. The tubing is absolutely compatible with dry and moist products, acidic or alcoholic substances up to +50 °C, as well as with milk. It is highly resistant to strong alkaline...
High-Pressure Tubing made of Polyamide

Reichelt Chemietechnik presents its new THOMAFLUID®-PA-High-Pressure Chemical Tubing for applications where high-pressure loadability and the properties of polyamide materials are required. Polyamides have a good chemical resistance to organic solvents but they can easily be affected by...
PTFE Sealing Paste for all kinds of sealings

The THOMASANN®-High-Chem-PTFE-Sealing Paste, CHETRA® TP, is a nontoxic, odorless paste for sealing of pipe threads as well as pneumatic and hydraulic fittings. Due to the moldable PTFE particles, which prevent a decay formation, CHETRA® TP provides a flexible, non-hardening...
Innovation! Polyamide – Highly Flexible and Absolutely Free of Plasticizers

Reichelt Chemietechnik presents its new THOMAFLUID®-High-Flexible- PA -Chemical Tubing for applications where small bending radius and the properties of polyamides are required. The tubing features high abrasion resistance as well as outstanding resistance to hot air and weather. The...
Solenoid valves made of PVDF for pharmaceutical engineering, biotechnology and laboratory technology

The 2/2-way and 3/2-way compact valves are small parts which are usually used in applications where only limited space is available. These valves are control valves for pressure or vacuum processes for inorganic and organic media.  The valves of this valve series are normally open or...
Screw Connections for Fabric-Reinforced Hoses

As a specialist for fluid technology, Reichelt Chemietechnik presents a new standard program of plastic screw connections for fabric-reinforced hoses made of polypropylene ( PP ) and polyvinylidene fluoride ( PVDF ). The connectors have been developed exclusively for thick-walled hoses and meet...
Luer-Lock connectors made of PP, PVDF and PFA

The new connector rounds out the complete program of Reichelt Chemietechnik in the segment of already established Luer-Lock tubing and pipe screw joints. The adapters are available for commonly used (flexible) tubing with inside diameter 4 mm and outside diameter 6 mm, as well as for pipes or...
Digital Flowmeter for laboratory and process technologyInnovation

With this innovation, Reichelt Chemietechnik presents a flowmeter meeting highest requirements, with integrated data display indicating the instantaneous value and the volume passed through. The measuring range lies between 0.1 to 25 ml/min, the permissible temperature range is -20 °C to...
1 of 2